Edimax Technology BR-6428nS - Manual (Page 54)

53
3‐2‐9 WISP
If your network service provided by your service provider is through wireless network,
please select this mode. After you have connected the router to the access point of service
provider wirelessly, please setup the WAN connection type in WAN page.
Item Name Description
Disable Disables this function.
Enable Enables this function and the router can connect to
the access points installed by your wireless service
provider. Any clients associated to the router can
access the Internet service through the wireless
network.
(If you are informed by your wireless ISP that the
wireless settings of the access point is changed,
please configure the router in this page for match the
settings.)
staEnable Enable this function and the router can only allow to
be connected through wired Ethernet cable for WAN
access service.
SSID This is the name of wireless network. Input the SSID
name that your wirelesses ISP provide to you.
Channel Number This is the radio frequency used to transmit and
receive the wireless signal. The wireless devices in the
same network should follow the same setting. Select