Edimax Technology BR-6428nS User Manual
Page 38
37
3‐1‐3 Remote Management
If you need to manage this broadband router outside of your local area network, you
can assign a remote IP address, so you can access this broadband router’s user interface
from the Internet. You can also disable this function to improve security.
Item Name
Description
Host address
Designate an IP address as the host for remote access
here.
Port
You can define the port number here. You can use the
default port setting “8080”, or any number between 1
and 65534.
Enabled
Check this box to enable the remote management
function.
Click “Apply” to save the changes on this page, or click “Cancel” to discard all the
changes. After you click “Apply”, you will see the following message:
Click “Apply” to restart the broadband router. this requires about 30 seconds and the
broadband router will stop responding (this is normal and is not malfunction). You can
reconnect to this broadband router and continue on other settings later. To setup other
items now and restart broadband router later, click ‘Continue’.