beautypg.com

3Com 10/100BASE-T4 PCI User Manual

Page 52

background image

Changing Software Settings

B-3

5 When the auto installation screen appears, as shown in

Figure 3-1 press [Enter].

6 When the main menu appears with a list of options, as

shown in Figure 3-2, select

Configuration/Diagnostic/

Troubleshooting.

7 When the Configuration and Diagnostic screen appears,

select

Configuration and Diagnostic Program.

8 Do one of the following:

a If you have multiple adapters installed, as shown in

Figure B-1, use the arrow keys to select the desired
adapter and press [Enter]. When the Configure Adapter
option is highlighted on the Install pull-down menu,
press [Enter] again.

b If you have a single adapter installed, the Configure Adapter

option appears already highlighted on the Install pull-down
menu. Press [Enter].

Figure B-1 Multiple Adapter Option Configuration33

Select Adapter

Select

Cancel

Select the adapter to be configured and/or tested.

[ENTER]=