3Com 10/100BASE-T4 PCI - Manual (Page 32)

3-12 C HAPTER 3: L OADING THE N ETWORK D RIVERS
4 From the displayed list of network operating systems select
the appropriate operating system for your environment and
press [Enter].
5 Follow the instructions on the subsequent screen to load
the driver.
Updating NDIS Drivers
To update one of the following drivers, complete these steps.
■
DOS NDIS 2.01 driver
■
OS/2 NDIS 2.01 driver
■
Windows NT 3.5 driver
■
Windows for Workgroups NDIS 3 driver
1 Follow steps 1 through 5 in the section “AutoLink
Installation” earlier in this chapter.
2 When the main menu screen shown in Figure 3-2 appears,
select Network Drivers and press [Enter].
3 When the Network Drivers screen appears, select NDIS
Driver Installation and Information and press [Enter].
4 When the NDIS Drivers screen appears, select Update
NDIS Drivers and press [Enter].
5 From the list of NDIS drivers, select the driver for the
appropriate operating system and press [Enter].
6 Follow the instructions displayed in the subsequent screens.
Auto Select Media Type
The Auto Select Media Type function is implemented by the
drivers contained on the 3C59X EtherDisk diskette supplied with
the 3C595-T4 PCI adapter. This includes NetWare ODI drivers and
NDIS 2.01 drivers. It also includes NDIS 3.0 drivers for Windows
for Workgroups, Windows
â 95, and Windows NT ä . The NDIS
drivers function with 486 and Pentium â processors.