3Com 10/100BASE-T4 PCI - Manual (Page 16)

2
I
NSTALLING THE
A
DAPTER
This chapter discuses the following topics:
■
Inspecting the Fast EtherLink 10/100BASE-T4 PCI adapter
■
Installing the boot PROM
■
Inserting the adapter
■
Connecting to the network
Inspecting the Adapter
Before installing the adapter in your computer, you should
visually inspect it for damage that might have occurred
during shipment from the factory.
CAUTION: Each adapter is packed in an antistatic container
to protect it during shipment. To avoid damaging any
static-sensitive components after removal from the
container, be sure to reduce any static electricity on your
person. One way to do this is to touch the metal chassis of
your computer. You can maintain grounding by wearing a
wrist strap attached to the chassis.
1 Open the shipping container and carefully remove its
contents.
The package should contain the following items:
■
3Com Fast EtherLink Parallel Tasking 10/100BASE-T4 PCI
adapter
■
Fast EtherLink Parallel Tasking 10/100BASE-T4 PCI Adapter
User Guide
■
3C59X EtherDisk diskette (version 5.1 or above)