3Com 10/100BASE-T4 - Manual (Page 31)

Loading NDIS Drivers 3-11
One or More Adapters in a Server
If you are running NetWare and have installed one or more
adapters in a PCI computer that is functioning as a server,
follow the instructions in the readme file on the EtherDisk
diskette to load the NetWare 4.x server driver.
The 3C59X EtherDisk diskette contains the NetWare 4.x
server driver (3C59X.LAN) and the NetWare Loadable
Modules (NLMs) that enable the NetWare 4.x server driver to
be used with NetWare 3.11, 3.12, 4.0x, or 4.1 software.
For complete details on loading the NetWare 4.x server driver,
refer to the following readme files in the \NETWARE\SERVER
subdirectory:
README.40X
README.41
README.311
README.312
Loading NDIS Drivers
To load the NDIS driver in a computer running one of the
following network operating systems, complete these steps.
■
DEC PATHWORKS
■
Banyan VINES client
■
IBM LAN Server
■
Microsoft LAN Manager
■
Artisoft LANtastic
1 Follow steps 1 through 5 in the section “AutoLink
Installation” earlier in this chapter.
2 When the main menu screen shown in Figure 3-2 appears,
select Network Drivers and press [Enter].
3 When the Network Drivers screen appears, select NDIS
Driver Installation and Information and press [Enter].