3M MP8749 - Manual (Page 10)

9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB
IN 2 port if Plug-and-Play does not function correctly.
NOTE
Function Projector Port Connection Cables
RGB input
RGB IN 1
RGB cable
with D-sub 15-pin shrink jack and
inch thread screws
RGB IN 2
RGB output RGB OUT
Audio input
(from the computer)
AUDIO IN 1
(interlocked with RGB IN 1)
Audio cable with stereo mini jack
AUDIO IN 2
(interlocked with RGB IN 2)
USB mouse control USB USB cable
PS/2 mouse control
CONTROL
PS/2 mouse cable
ADB mouse control ADB mouse cable
Serial mouse control Serial mouse cable
RS-232C communication RS-232C cable
S-video input S-VIDEO IN S-video cable with mini DIN 4-pin jack
Video input VIDEO IN Audio/video cable
Component video input
COMPONENT VIDEO Y
Component video cable COMPONENT VIDEO C
B
/P
B
COMPONENT VIDEO C
R
/P
R
Audio input
(from video equipment)
AUDIO IN L
Audio/video cable or
Audio cable with RCA jack
AUDIO IN R
Audio output AUDIO OUT Audio cable with stereo mini jack