Xerox 8500/8550 - Manual (Page 98)

Maintenance and Cleaning
Phaser® 8500/8550 Color Printer
5-7
Replacing the Maintenance Kit
The maintenance kit contains a maintenance roller that keeps the surface of the imaging drum
clean and oiled.
Note: Order a new maintenance kit when the control panel displays a message that the
maintenance kit is low. Replace it when the control panel prompts you to replace the
maintenance kit. To order a replacement maintenance kit, contact your local reseller or go to
www.xerox.com/office/8500_8550supplies .
To replace the maintenance kit:
1. Open the door on the right side of the printer.
Warning: The printer’s interior may be hot. Do not touch the hot surfaces!
2. Remove the maintenance kit (labeled A) from the maintenance kit slot.
8500-034
8500-032