Yamaha DGX-202 - Manual (Page 78)

78
Data Backup & Initialization
■ Data Backup • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
The following data can be stored to internal flash memory as data backup.
■
Data Initialization • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
● All Data Initialization
All data can be initialized and restored to the factory preset condition by
turning on the power while holding the highest (rightmost) white key and
highest (rightmost) black key on the keyboard. “All Mem CLr” will appear
briefly on the display.
● Loaded Song Initializaion
You can erase only the loaded song data by turning on the power while hold-
ing the highest (rightmost) black key on the keyboard.
Group Parameter
SONG User Song Data
ONE TOUCH
SETTING See page 28.
PC PC Memory
FUNCTION Tuning
Split Point
Touch Sensitivity
Style Volume
Song Volume
Metronome Volume
Grade On/Off
Demo & DJ Cancel
Touch Touch On/Off
● About the Internal Flash Memory
The Song, One Touch Setting and PC pa-
rameters are automatically stored when
each saving operation is done.
Function and touch On/Off are stored when
Pressing and Holding the Function button.
• Never attempt to turn the
power off when a “WRITING!”
message is shown in the dis-
play. Doing so can damage the
internal flash memory and
result in loss of data.
• All data listed above, plus
loaded song data, will be
erased and/or changed when
the All Data Initialization pro-
cedure is carried out.
• Carrying out the data initializa-
tion procedure will usually
restore normal operation if the
DGX-202 freezes or begins to
act erratically for any reason.
CLr
All Mem