ZyXEL Communications G-360 - Manual (Page 44)

ZyXEL G-360 User’s Guide
3-14 Using the ZyXEL Utility
Table 3-8 Profile
LABEL DESCRIPTION
,
,
or
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless security is
deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless security is
activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security is
deactivated.
Profile Name This is the name of the pre-configured profile.
SSID This is the SSID of the wireless network to which the selected profile associate.
Connect To use a previously saved network profile, select a pre-configured profile name in the
table and click Connect.
Add To add a new profile into the table, click Add.
Delete To delete an existing wireless network configuration, select a profile in the table and click
Delete.
Edit To edit an existing wireless network configuration, select a profile in the table and click
Edit.
Profile Info
The following fields display detail information of the selected profile in the Profile List table.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the profile.
Channel This field displays the channel number used by the profile.
Security This field shows whether WEP data encryption is activated (WEP, WPA-PSK, WPA-
RADIUS or WPA) or inactive (Disabled).
3.3.1 Adding a New Profile
Follow the steps below to add a new profile.
Step 1.
Click Add in the Profile screen to display the screen as shown next. Click Next to continue.