Yamaha RDX-E700 - Manual (Page 13)

CONNECTING EXTERNAL COMPONENTS
11
Eng
lish
PREP
ARA
TION
You can connect external components such as a CD recorder or MD recorder to the following jacks on the DVD receiver.
This section provides an example of other equipment connections. For information on your equipments, refer to the
manuals for them.
If you connect a CD recorder or MD recorder to the DVD
receiver using optical cables, you can record audio sources
played on the DVD receiver digitally. Also, you can enjoy
audio sources played on the recorder with the DVD
receiver.
y
AM/FM broadcasts cannot be output from this unit’s DIGITAL
OPTICAL OUT jack. To record AM/FM broadcasts, use a
commercially available audio cable to connect the AUX OUT
jack on the DVD receiver to the analog input jack on your
recorder.
• Turn off the component before connecting it to the DVD
receiver.
• Do not connect the power cable of the DVD receiver until all
cable connections are completed.
1
Connect the DIGITAL OPTICAL OUT jack on
the DVD receiver to the digital input jack on
the recorder using an optical cable.
2
Connect the AUX OUT jacks on the DVD
receiver to the analog input jacks on the
recorder using an audio cable.
3
Connect the AUX IN jacks on the DVD
receiver to the analog output jacks on the
recorder using an audio cable.
CONNECTING EXTERNAL COMPONENTS
Connecting a CD recorder or MD
recorder
Notes
L
R
DIGITAL
OPTICAL
VIDEO OUT AUX TV
OUT IN IN VIDEO COMPONENT
TUNER
AM
ANT
GND
FM ANT
75 Ω UNBAL.
P B
P R
Y
OUT
L
R
ANALOG
DIGITAL
OPTICAL
IN OUT IN
CD recorder or
MD recorder
Optical
cable
Audio
cable