Yamaha RDX-E700 - Manual (Page 12)

CONNECTING ANTENNAS
10
To enjoy radio on the DVD receiver, you need to connect AM and FM antennas to the DVD receiver. This product
includes an AM loop antenna and indoor FM antenna. If there is a problem of weak radio wave reception in your area or
you want to improve radio reception, we recommend that you use optional outdoor antennas. For details, consult the
nearest authorized YAMAHA dealer or service center.
■ About grounding
For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A good
earth ground is a metal stake driven into moist earth.
1
Attach the antenna stand to the antenna.
When attaching the antenna to the wall, you do not
need to use the antenna stand.
2
Press and hold the tab.
3
Insert the AM loop antenna lead wires into
the AM ANT terminal.
4
Release the tab.
5
Repeat steps 2 to 4 to insert the AM loop
antenna lead wires into the GND terminal.
6
Place the antenna away from the DVD
receiver and speaker cables.
While listening to the radio, rotate the antenna head
to find the best angle for reception.
1
Connect the supplied indoor FM antenna to
the FM ANT jack on the DVD receiver.
2
Place the antenna away from the DVD
receiver and speaker cables.
CONNECTING ANTENNAS
Connecting the AM loop antenna
L
R
DIGITAL
OPTICAL
AUX VIDEO OUT TV
IN IN OUT VIDEO COMPONENT
TUNER
AM
GND
ANT
FM ANT
75
Ω UNBAL.
Y P B
P R
OUT
Indoor FM
antenna
(supplied)
AM loop
antenna
(supplied)
Ground
(GND terminal)
Connecting the FM antenna