Xerox Phaser 3435 - Manual (Page 72)

Using SetIP
11
2
Using SetIP
• Installing SetIP
• Using SetIP
Installing SetIP
1
Make sure that the printer is connected to your computer
and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK.
3
Click Install SetIP Utility(Optional).
4
Click Next.
5
Click Next.
6
Click Finish.
Using SetIP
1
From the Windows Start menu, select Programs or All
Programs
Æ your printer driver name Æ SetIP Æ
SetIP.
The program automatically detects and displays new
and configured print servers on your network.
2 Select the name of your printer and click . If you
cannot find your printer name, click to refresh
the list.
N OTES :
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click enter
your network printer card’s IP address, subnet mask, default
gateway, and then click Apply.
3 Click OK to confirm the settings.
4 Click Exit to close the SetIP program.