Xerox Phaser 3435 - Manual (Page 17)

2.2
Information menu
This menu contains printer information pages that give details about the
printer and its configuration.
Item Explanation
Menu Map The menu map shows the layout and current
settings of the control panel menu items.
Configuraton The configuration page shows the printer’s
current configuration. See page 8.1.
Demo Page The demo page allows you to check if your
printer properly performs printing. See
page 2.7.
PCL Font List
PS3 Font List The font sample list shows all of the fonts
currently available in the selected language.
EPSON Font The font sample list shows all of the fonts
currently available in the selected language.
Layout menu
Use the Layout menu to define all settings relating to output.
Item Explanation
Orientation
Choose the default orientation of the print image
on the page.
Simplex
Margin Set the margin of print materials for one-sided
printing. You can increase or decrease the value in
0.1 mm increments. The margins may differ
according to the paper size and printing
orientation.
• Top Margin: Set the top margin, from 0.0 to
250 mm.
• Left Margin: Set the left margin, from 0.0 to
164 mm.
Duplex
To print on both sides of paper, choose the binding
edge as follows.
• Long Edge: Flip on the long edge. Prints pages
to read like a book.
• Short Edge: Flip on the short edge. Prints
pages to read by flipping over like a note pad.
Select Off to print on one side of the paper.
Values: Portrait, Landscape
Portrait Landscape
Values: Off, Long Edge, Short Edge
Long Edge in the
Portrait orientation
Long Edge in the
Landscape orientation
2 5
3
2
5
3
2
5
3
2 5
3
Short Edge in the
Landscape orientation
Short Edge in the
Portrait orientation