Yamaha AV-S7 - Manual (Page 8)

Loading the batteries for the
remote control transmitter
1
Remove the battery compartment cover.
(Slide the cover in the direction of the arrow.)
2
Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
equivalent) into the battery compartment.
* Installing the batteries improperly may cause
failure.
3
Replace the battery compartment cover.
Precautions for battery use
• Insert the batteries according to the direction
indicated in the battery compartment.
• Replace all batteries with new ones at the same
time.
• Remove the batteries if they are weak or if the unit
will not be used for a long period of time.
• Do not mix normal batteries with rechargeable
batteries.
Proper use of the remote control
transmitter
Aim the remote control transmitter at the remote control
sensor (within a 60° range with no obstacles) and
operate as shown.
Notes concerning use
• Replace the batteries if the control distance
decreases or operation becomes unstable.
• Periodically clean the transmitter window on the
remote control transmitter and the sensor on the
center speaker with a soft cloth.
• Exposing the sensor on the center speaker to strong
light (such as an inverter-type fluorescent lamp) may
interfere with operation. In this case, reposition the
center speaker to avoid direct light.
• Keep the remote control transmitter away from
moisture, excessive heat, shock and vibrations.
• The remote control transmitter’s range is from 0.2m
(8”) to 6m (20’) from the sensor.
STANDBY INPUT 1 C INPUT 2
L
A B E D C VOLUME
REAR
R
STANDBY/ON INPUT PROGRAM
30 ° 30
°
E-4
PRECAUTIONS
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
2
1
3
Remote control
sensor Within approximately
6 m (19.7 feet)
AV-S7(E)(E/F)1-16 9/11/0 9:36 AM Page E-4