Yamaha AV-S7 - Manual (Page 17)

E-13
English
CONNECTIONS
Connection to a TV without an AUDIO OUT terminal
INPUT
THROUGH SYSTEM CONNECTOR
MARK
FRONT
R L
FRONT
R L
L
R
1 2
INPUT
THROUGH
SYSTEM
CONNECTOR
MARK
L
R
1 2
AUDIO
INPUT
VIDEO
INPUT
L
R
VIDEO
OUTPUT
AUDIO
OUTPUT
L
R
AUDIO
OUTPUT
L
R
MARK SYSTEM CONNECTOR
MARK
SYSTEM
CONNECTOR
Power amplifier/subwoofer
(SW-AVS7)
Center speaker
(NX-AVS7)
System
connector
VCR
TV
CD or MD
player
Audio connection
cord (provided)
System connector cable (provided)
*1
*2
*3
*1 : Video connection cable (optional)
*2,3 : Audio connection cable (optional)
1
Connect the SYSTEM CONNECTOR (Refer to page
12).
2
Connect the AUDIO OUTPUT terminals on the VCR
to the INPUT1 terminals on the SW-AVS7.
3
Connect the THROUGH terminals of INPUT 1 to the
AUDIO INPUT terminals on the TV using connector
cable (optional).
* A signal is applied to INPUT 1 at the THROUGH
terminals only when the AV-S7 is off.
4
Connect the INPUT 2 terminals (Refer to page 12).
• If the AV-S7 system is set to STANDBY or the turned off, the signal applied to INPUT 1 is sent to the THROUGH terminal of
INPUT 1.
• Use the volume control of the TV when playing back sound from the TV or VCR without using the AV-S7.
*3
AV-S7(E)(E/F)1-16 9/11/0 9:36 AM Page E-13