Xerox DocuColor 250 - Manual (Page 3)

Page 3
T O CHECK FOR AND INSTALL UPDATES MANUALLY FROM THE C ONTROL P ANEL
1 Turn off the copier before installing updates.
2 Press the Menu button to access the Functions menu, and press System Updates.
System Updates checks the server for new updates and displays a message indicating whether
or not updates are available.
3 Press OK.
If updates are available, the message “Install now?” appears.
4 Select Yes and press OK.
5 Enter the administrator password, and press OK.
The updates are downloaded (if they have not already been downloaded) and installed.
6 If the updates require a server restart or a reboot, the Fiery EXP250 is automatically
restarted or rebooted when installation is complete.
There is a one-minute delay before a reboot.
7 When the Fiery EXP250 reaches the Idle state, turn on the copier.
Updating system software through System Updates from the FACI
You can configure System Updates to check for updates in several ways:
• Notify when updates are available : When updates are available, a pop-up message appears
next to the System Updates icon in the Windows taskbar on the FACI. Clicking the pop-
up message opens the System Updates window. This option requires that you download
and install the updates manually.
• Download the updates automatically and notify (faster installation) : When updates are
available, a pop-up message appears next to the System Updates icon in the Windows
taskbar on the FACI. The updates are downloaded automatically but not installed.
Clicking the pop-up message opens the System Updates window. This option requires that
you install the updates manually.
• Automatically download and install updates, and reboot system : Updates are downloaded
and installed automatically. System Updates checks for available updates at a time and day
you specify, downloads and installs them, and reboots or restarts the server if required. No
notification is displayed and no user action is required.