ZyXEL Communications G-360 - Manual (Page 42)

ZyXEL G-162/G-360 User’s Guide
4-4 Wireless Security
9. Click [OK] to save your settings and return to the previous screen.
10. If you want to select 802.1 x authentications with WEP, you will need to configure your
802.1x settings by checking [enable CCX mode] to see advanced settings. To configure
the 802.1x authentication, please refer to section 4.5. Also, you need to know if the
AP/Router you will connect to supports the 802.1x or not and then follow your
AP/Router setting.
4.3 Configuring WPA-PSK
1. Select [WPA] under [Security]
2. Select [PSK(Pre-Shared Key)] under [Authentication Mode]
3. Click [Configure] and then you will see the screen below.