ZyXEL Communications G-360 - Manual (Page 22)

ZyXEL G-162/G-360 User’s Guide
1-12 WLAN Networking
OTIST Function (Above Red Rectangle)
OTIST (One Touch Intelligent Security Technology) is the ZyXEL proprietary one bottom
security technology. You must have the ZyXEL P-334WT router or other ZyXEL
AP/Router supporting OTIST to set the wireless adapter to use the same wireless
settings.
1. Check this box to enable OTIST
2. [Setup Key] Enter the same setup key (of exactly eight ASCII characters) as the ZyXEL P-334WT router
or other ZyXEL AP/Router to which you want to associate. The default OTIST setup key is “01234567”.
If you change the OTIST setup key on the ZyXEL P-334WT or other ZyXEL Routers
supporting OTIST, you must also make the same change here.
3. Click [Start] to encrypt the wireless security data using the setup key and have the ZyXEL g+ AP or
wireless router set your G-162/G-360 to use the same wireless settings as the ZyXEL g+ AP or wireless
router at the same time. Please see the section for OTIST information.
Table 1.2 Link Info
Link Status Green Z icon displays “Connected to Network”
Duration This field displays the period when users enable the connection.
Receive
Good Packets
This field displays the total number of complete, uninterrupted, and
Duplicate Packets This field displays the total number of duplicated data received.
Error Packets This field displays the total number of incomplete, delayed or interrupted,
Beacons This field displays a frame or message set by an adapter indicating a serious
Total Bytes This field displays the total number of bytes received