Yamaha CC-50 - Manual (Page 43)

E-41
English
HOW TO USE THE BUILT-IN TIMER
Sleep timer operation
This unit can be turned off automatically.
1
Play the desired sound source.
2
Press the SLEEP button. “SLEEP” appears on the display,
and soon it is replaced by “120”.
3
Press the SLEEP button repeatedly until the desired sleep
time appears in the display. The display will change as
described below. (Time is displayed by the minute.)
* The original display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator illuminates to indicate that the
sleep timer is on.
4
The unit will turn off automatically when the preset sleep
time has passed.
To confirm the sleep time setting
Press the SLEEP button once. “SLEEP” appears on the
display, and soon it is replaced by the remaining time of the
preset sleep time.
To change the sleep time
While the SLEEP indicator illuminates, press the SLEEP
button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until “OFF SLEEP” appears on the display.
(The SLEEP indicator will go out.)
To set the sleep time using front panel buttons
First press the DISPLAY button to display the current time.
Within 7 seconds, press the AUTO MEMORY button.
Whenever the AUTO MEMORY button is pressed, the sleep
time changes.
Using the timer and the sleep
timer at the same time
1
Prepare timer playback. (See pages 38 and 39.)
*
Do not turn the power of this unit off after the timer
setting is finished.
2
Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer will
function to turn the source on at the preset time.
Notes
•
Do not set the timer time so that the timer will start during
sleep timer operation. (Since sleep timer operation has
priority, the timer will not operate.)
• If the power is turned off by the sleep timer while playing
back a CD with “
” is illuminated on the display, when
CD playback begins at the time set on the timer play
setting, playback begins from the beginning of the track
which had been being played back when the power was
turned off by the sleep timer.
*
The “ ”indicator is switched on and off by pressing
the RESUME button on the CD player.
OFF SLEEP
(Sleep timer is off.)
120 90 60 30
↑
↑
↑ ↑ ↑
- +
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
TIME PROG TAPE EDIT + I0
STOP PLAY/PAUSE
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
SLEEP POWER DISPLAY VOLUME
DECK PHONO/AUX
TUNER DIRECT
A/B
A/B/C/D/E
PLAY
EFFECT LEVEL DSP MODE SP/PHONES
- +
Receiver
POWER
DISPLAY AUTO MEMO
POWER
SLEEP