Yamaha CC-50 - Manual (Page 22)

/
E-20
To stop program play
•
Press the stop button. The first track number
programmed will be displayed.
• To resume playback, press the play/pause / button.
Playback will begin from the beginning of the program.
To cancel a programmed sequence
There are several methods as described below.
• Press the stop button while the unit is stopped.
• Open the disc table
•
Switch off the power.
COMPACT DISC PLAYER OPERATION
To check program data
1. If during playing back, press the stop button.
2. Press the PROG button.
3. Each time the SKIP
button is pressed, the track
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the
track number can be returned (sequentially in reverse
order) by pressing the SKIP
button.
To correct program data
1. Follow the procedure described in “To check program
data”.
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press a track number input button to select a track to
replace the one displayed. The previously programmed
track will be cleared from the memory and the new one
will be programmed.
4. After the correction has been completed, press the
PROG button or play/pause / button once again.
/ CD Player
- +
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
TIME PROG TAPE EDIT + I0
STOP PLAY/PAUSE
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
SLEEP POWER DISPLAY VOLUME
DECK PHONO/AUX
TUNER DIRECT
A/B
A/B/C/D/E
PLAY
EFFECT LEVEL DSP MODE SP/PHONES
- +
PROG