Automatic tape-editing, E-33 english, Recording a compact disc – Yamaha CC-50 User Manual
Page 35: Receiver cd player tape deck, Load a tape into the cassette compartment, Set the reverse mode switch to or
E-33
English
Automatic tape-editing
This convenient feature can be used to program tracks on a
disc for recording to tape. By only memorizing the tape’s total
possible recording time, the unit will automatically program
tracks or help you to program tracks so they will fit onto the
tape with the least amount of unrecorded space remaining at
each end of the tape.
To record a disc with the order of tracks
unchanged
1
Select the CD player so that “CD” appears on the display
by pressing the INPUT selector
or
button, and load
the disc to be recorded.
2
Load a tape into the cassette compartment.
3
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
*
For selection of the Dolby B or C position, refer to the
“Dolby B and C Type Noise Reduction” on page 29.
4
Set the reverse mode switch to
or
.
5
Press the TAPE button to select the length of the tape to
be used. Whenever pressed, C-46, C-54, C-60 and C-90
appear on the display in turn, and next it returns to the
normal display mode.
When using tapes other than C-46, C-54, C-60 or C-90
When C-46, C-54, C-60 or C-90 is appearing on the
display, input the tape length by using the track number
input buttons on the remote control transmitter
(Examples)
C-62: Press “6” and then “2”.
C-30: Press “3” and then “0”, or press “+10” three times
and then “0”.
6
Press the EDIT button. (“EDIT” appears on the display.)
The following internal operations are carried out before
recording is automatically started.
1)Tracks on the disc are automatically divided between
side A and side B. You can check the process by
watching the display.
2)The end part of the tape on which recording cannot be
done is wound.
3)This unit starts searching for a peak level through all
tracks to be recorded. (While searching, “LEVEL”
flashes on the display.) When searching is finished, this
unit adjusts the recording level properly on the basis of
this data.
4)CD playback and recording starts. Recording is carried
out on both side A and B of the tape.
off C-46 C-54 C-60 C-90
→
→
→
→
→
RECORDING A COMPACT DISC
Receiver
CD Player
Tape Deck
1
1
4 3 2
5
6
5
1
-
+
1
2
3
4
5
1
2
3
4
5
6
7
8
6
7
8
9
0
A
B
C
D
E
TIME
PROG
TAPE
EDIT
+
I0
STOP
PLAY/PAUSE
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
DOWN
UP
PLAY
STOP
REC/PAUSE
SLEEP
POWER
DISPLAY
VOLUME
DECK
PHONO/AUX
TUNER DIRECT
A/B
A/B/C/D/E
PLAY
EFFECT LEVEL
DSP
MODE
SP/PHONES
-
+