ZyXEL Communications PoE-80 - Manual (Page 10)

PoE-80 User’s Guide
10
2 Hardware and Installation
Do not block the device’s rear panel fans or the side panel ventilation
holes. Leave space between devices when stacking.
2.1 Desktop Installation
Step 1. Set the PoE-80 upside-down on a sturdy level space with a power outlet nearby.
Step 2. Make sure there is enough clearance around the PoE-80 to allow air circulation and the
attachment of cables and the power cord.
Step 3. Remove the adhesive backing from the supplied rubber feet.
Step 4. Attach the rubber feet to each corner on the bottom of the PoE-80. These rubber feet help
protect the PoE-80 from shock or vibration and ensure space between devices when
stacking.
Step 5. Turn the PoE-80 right-side up after you attach the rubber feet.
2.2 Rack-mounted Installation
The PoE-80 can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other
equipment. Follow the steps below to mount your PoE-80 on a standard EIA rack using the included
rack-mounting kit.
Step 1. Align one bracket with the holes on one side of the PoE-80 and secure it with the bracket
screws. Similarly, attach the other bracket.