Yamaha DPX-1 - Manual (Page 33)

E- 30
Message
NO SIGNAL
INPUT A (Example)
OUT OF RANGE
UNKNOWN FORMAT
AUTO SYNC...
STILL
STILL OFF
MEMORY 1—6
ESCAPE:EXIT (Example)
LAMP REPLACEMENT TIME HAS
COME. PLEASE REPLACE WITH A
NEW LAMP.
PRESS “ESCAPE” TO REMOVE THIS
INDICATION.
PRESS AGAIN FOR STANDBY.
■ Message display
Condition
This unit is not receiving any input signal.
The input name selected by the INPUT button is displayed. It will turn off 1 minute after the signal has
been input.
This unit cannot receive the PC signal that is coming into this unit.
This unit cannot receive the video signal that is coming into this unit.
This unit is making the most appropriate setting according to the input RGB signal being received.
The STILL (freezing the image) function has been activated.
The STILL (freezing the image) function has been cancelled.
The memory setting number selected is displayed and turns off after 1 minute.
Help messages are displayed for easier menu operation.
This message is displayed when the power switch is turned on after the lamp running time has exceeded
1000 hours. Press the ESCAPE button to turn off the message.
This unit will enter the standby mode and the lamp will turn off if the STANDBY/ON button is pressed
again.
Additional information