Yamaha DPX-1 - Manual (Page 26)

E- 23
English
MENU
3. Select the submenu item to be reset by pressing the
h
or g button.
4.
Press the SELECT or + button to open the confirma-
tion message screen.
5.
Press the SELECT button to reset to the factory
setting.
The menu closes after the parameters have been reset to the
factory settings.
Menu operation
IMAGE SIGNAL INITIAL SETUP
ESCAPE: EXIT MEMORY1 VIDEO
LAMP RUNNING TIME 2H. NO
YES
PRESS ”SELECT” TO RESET
LAMP RUNNING TIME ON
”YES”.
3. Select “YES” by pressing the h or g button, and then
press the SELECT button to reset the lamp running
time to 0.
4.
Press the MENU button to close the menu.
● Submenu operation—“RESET”
[Operation group D]
1. Select the menu item “RESET” in the menu group
“INITIAL” by following steps 1—3 in “Basic menu
operation”.
The submenu mark “ ” appears on the right side of the item.
2. Press the SELECT or + button to open the submenu.
IMAGE SIGNAL INITIAL SETUP
COLOR SYSTEM AUTO
COMPONENT
RGB PC
ENGLISH
2H.
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
MEMORY1 VIDEO
OFF ON
IMAGE SIGNAL INITIAL SETUP
RESET
CURRENT MEMORY
ALL MEMORIES
ALL SETTINGS
ESCAPE: EXIT MEMORY1 VIDEO
IMAGE SIGNAL INITIAL SETUP
RESET
CURRENT MEMORY
ALL MEMORIES
ALL SETTINGS
ESCAPE: EXIT MEMORY1 VIDEO
IMAGE SIGNAL INITIAL SETUP
PRESS ”SELECT” TO RESET
TO FACTORY SETTINGS.
ESCAPE: EXIT MEMORY1 VIDEO