Pitch bend range [pitchbendrange, Other settings – Yamaha CLP-970C EN User Manual

Page 90

CLP-970

You can specify how far down you should press on the
right pedal until the damper effect (page 31) starts
working. This setting is effective when the right pedal
function (page 81) is set to either SustainCont or Sus-
tain.
See the procedure on page 72.

Setting range:

–2 (effective with the shallowest press) - 0 - +2 (effec-
tive with the deepest press)

This parameter enables you to set the range of continu-
ous pitch change made by the Pitch Bend function.
• This parameter is effective only on the keyboard

performance sound.

• You can set the range in semitone steps.
See the procedure on page 72.

Setting range:

–12 (Pitch is lowered by 12 semitones [one octave]
when you press the pedal.) - +12 (Pitch is raised by 12
semitones [one octave] when you press the pedal.)

Normal setting:

–2

The CLP-970 provides the XG tone generator for the
purpose of playing GM, XG, or DOC music data
(page 60). You can replace some XG voices with the
preset voices on the panel for playback. This parameter
enables you to select “Native” (using the preset voices)
or “XG” (using the XG voices).
See the procedure on page 72.

Setting for:

All preset voices on the panel

Setting range:

Native Using the preset voices
XG

Using the XG voices

Normal setting:

GrandPiano1 Native

(using the preset voices)

Other voices

(using the XG voices)

Setting the point at which the
damper pedal starts to affect the
sound [HalfPedalPoint]

Pitch bend range
[PitchBendRange]

YES

Replacing the XG voices with pre-
set voices [XGAlternative]

YES

Select the desired item.

Select on or off.