Yamaha CLP-970C EN - Manual (Page 49)

CLP-970
49
Recording Your Performance
Recording in Dual or Split mode
When you record in Dual or Split mode, the Clavinova records each voice onto a separate track. The follow-
ing table shows how tracks are assigned to each voice.
CAUTION
When you record multiple parts into tracks one by one, or when you record new data over an existing song (see
page 46), the existing data will be erased. Proceed with caution.
In the following example, Tracks 1, 2, and EXTRA TRACKn have been selected for recording.
Note: TRACKn = TRACK 3 – TRACK 16
If “n+1,” “n+2,” and “n+3” exceed 16, TRACKs 1, 2, and 3 are used.
Switching between Dual and Split mode in a song is not recorded.
Tracks assigned for
recording
Dual Split Split+Dual
TRACK1 TRACK2
EXTRA
TRACKn
TRACK1 TRACK2
EXTRA
TRACKn
TRACK1 TRACK2
EXTRA
TRACKn
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Tracks
used for
record-
ing
MAIN
(1st voice)
TRACK1 TRACK2 TRACKn TRACK1 TRACKn TRACK1 TRACKn
LEFT
(1st voice)
– TRACK2 TRACKn+1 TRACK2 TRACKn +1
MAIN
(2nd voice)
TRACK3 TRACK4
TRACKn
+2
– TRACK3 TRACKn +2
LEFT
(2nd voice)
– – TRACK4 TRACKn +3
TIP