Yamaha CLP-970C EN - Manual (Page 27)

CLP-970
27
Listening to 50 Piano Preset Songs
Adjusting the tempo
You can also use the D[–]/[+]
buttons to change the tempo.
Resetting the tempo
Whenever you select a new
preset song, the tempo is
automatically reset to the
song’s original value.
You can use the TEMPO [DOWN]/[UP] buttons to adjust the playback
tempo as required. The default tempo (the song’s original tempo) is set when
you press the [DOWN] and [UP] buttons simultaneously.
Press either of the SONG SELECT [
]/[ ] buttons to return to the song
select screen.
3.
Stop the song playback.
When playback is complete, it automatically stops and the Clavinova
locates the top of the song. To stop playback in the middle of a song,
press the [STOP] button. You can also pause playback by pressing the
[START/PAUSE] button. Playback stops when you press the button.
Fast forward and rewind
You can perform the following operations in the song select screen:
• Use the B [–]/[+] buttons to move back and forth (rewind and fast for-
ward) through the song while the song is played or stopped.
• Press the SONG SELECT [ ] or the C [–] button during playback to
restart playback from the top of the song.
• Press the SONG SELECT [ ] or the C [+] button during playback to start
playback from the next song.
• Press the SONG SELECT [ ] or the C [–] button while playback is
stopped in the middle of the song to locate the top of the song.
Default screen:
The default screen is a voice
select screen (page 30) that
appears when you turn on
the power to the Clavinova.
4.
Return to the default screen.
Press the [EXIT] button.
TIP
NOTE
A B
C D
NO YES
TERMINOLOGY