Yamaha 303 - Manual (Page 68)

Basic Oper
ation
Basic Displays (Main Display and File Selection Display)
CVP-305/303/301 Owner’s Manual 68
3
Press the [2π π π π† † † † ]–[6π π π π† † † † ] and [7π π π π ] buttons, corresponding to the
character you wish to enter.
• Deleting characters
Move the cursor to the character you wish to delete by using the [DATA
ENTRY] dial, and press the [7†] (DELETE) button. To delete all charac-
ters on the line at once, press and hold the [7†] (DELETE) button.
• Actual entry of characters
Move the cursor or press another letter-input button.
• Canceling the character-entering operation
Press the [8†] (CANCEL) button.
• Entering special character marks (umlaut, accent, Japanese “ ”
and “ ”)
Select a character to which a character mark is to be added and press
the [6†] button before actual entry of the character.
• Entering marks
1 After actually entering a character by moving the cursor, press the
[6†] button to call up the mark list.
2 Use the [DATA ENTRY] dial to move the cursor to the desired mark,
then press the [8π] (OK) button.
• Entering numbers
First, select one of the following: “A B C” (full-size alphabet), “ABC”
”CASE“ (half-size capital alphabet) and “case” (half-size lowercase
alphabet). Then, press and hold down the appropriate button, [2π†]–
[5π†], [6π] and [7π] button for a while, or press it repeatedly until
the desired number is selected.
• Converting into Kanji (Japanese language)
When the input “hiragana” characters are shown in reverse display
(highlighted), press the [ENTER] button one or several times to convert
the characters into the appropriate kanji. To actually enter the change,
press the [8π] (OK) button or enter the next character.
When the input “hiragana” characters are shown in reverse dis-
play (highlighted):
• Re-converting the characters into other kanji
Press the [ENTER] button.
• Changing the reversed area
Use the [DATA ENTRY] dial.
• Changing the converted kanji back to “hiragana”
Press the [7†] (DELETE) button.
• Clearing the reversed area at once
Press the [8†] (CANCEL) button.
• Entering the “hiragana” itself (without converting it)
Press the [8π] (OK) button.
4
Press the [8π π π π ] (OK) button to actually enter the new name and
return to the previous display.
The following half-size marks
cannot be entered for a file/
folder name.
¥ \ / : * ? " < > |
Several different characters are assigned to each but-
ton, and the characters change each time you press
the button.
In the case of characters which
are not accompanied by special
character marks (with the excep-
tion of kanakan and half-size
katakana), you can call up the
mark list by pressing the [6†]
button after selecting a charac-
ter (before actual entry of a char-
acter).