Yamaha DJX - Manual (Page 67)

67
The following chart lists and briefly explains the parameters. For more
information on the workings of the RIBBON CONTROLLER, see the box on
page 68.
RIBBON CONTROLLER Parameters
No. Parameter Name Display Name
01 Cutoff Frequency Cutoff
02 Resonance Resonanc
03 Reverb Send Level RevLevel
04 Chorus Send Level ChoLevel
05 DSP Send Level DspLevel
06 Modulation Mod
Description
This is the same parameter as controlled by the CUTOFF knob (page 61).
The mid point on the ribbon corresponds to the 12:00 position of the
CUTOFF knob.
This is the same parameter as controlled by the RESONANCE knob (page
61). The mid point on the ribbon corresponds to the 12:00 position of the
RESONANCE knob.
This is the same parameter as #01 in the ASSIGN knob parameters. (See
pages 34, 64.)
This is the same parameter as #02 in the ASSIGN knob parameters. (See
pages 35, 64.)
This is the same parameter as #03 in the ASSIGN knob parameters. (See
pages 36, 64.)
This is the same parameter as #04 in the ASSIGN knob parameters. (See
page 64.) However, unlike the ASSIGN knob (for which 12:00 corresponds
to no modulation), the RIBBON CONTROLLER affects modulation in this
way:
RIBBON CONTROLLER
This is the same parameter as #05 in the ASSIGN knob parameters. (See
page 64.)
This is the same parameter as #06 in the ASSIGN knob parameters. (See
page 64.)
This is the same parameter as #07 in the ASSIGN knob parameters. (See
page 64.) The mid point on the ribbon corresponds to the center pan
position.
This is the same parameter as #08 in the ASSIGN knob parameters. (See
page 64.)
This is the same parameter as controlled by the GROOVE knob (page 61).
The mid point on the ribbon corresponds to the 12:00 position of the
GROOVE knob.
This is the same parameter as #09 in the ASSIGN knob parameters. (See
page 64.)
This is the same parameter as #10 in the ASSIGN knob parameters. (See
page 64.)
This is the same parameter as #11 in the ASSIGN knob parameters. (See
page 64.) When the far left part of the ribbon (minimum) is held, the
Pattern stops.
This is the same parameter as #12 in the ASSIGN knob parameters. (See
page 64.)
07 Attack Time Attack
08 Release Time Release
09 Pan Pan
10 Volume Volume
11 Groove Groove
12 Dynamics Dynamics
13 Dynamics Strength Strength
14 Turntable Turntbl
15 Arpeggiator Speed ArpSpeed
0 (no modulation) Maximum
Keep in mind that the assigned parameter may have little or no effect, depending on the
selected song, style, or voice.