Xerox 3535 - Manual (Page 59)

1 – 4 1 Xerox DocuColor 3535 Printer/Copier
Border Erase
The Border Erase feature enables you to eliminate unwanted
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50mm (0.0 through 2.0
inches) in 1mm (0.1 inch) increments.
Border Erase options can be used individually or combined
together:
Top & Bottom For Normal the default is 2mm (0.1 inch). For Variable Erase the
default is 5mm (0.2 inch).
Left & Right For Normal the default is 2mm (0.1 inch). For Variable Erase the
default is 5mm (0.2 inch).
Center The default is 0mm (0 inches).
The selected settings are applied to both sides of 2-sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the Border Erase.
When making copies the copier adds a margin of 2mm (0.1 inch)
to all sides. This cannot be eliminated.