Xerox 3535 - Manual (Page 55)

1 – 3 7 Xerox DocuColor 3535 Printer/Copier
Stapling
This section describes the procedure for programming the Output
feature to staple output. You must have a Finisher (optional
accessory) to staple output.
1
On the Added Features tab select Output/Stapling.
2
Select Collated/Stapling.
3
Select Stapling. The Stapling screen is displayed.
4
Select the desired stapling position.
The Finisher Tray is automatically selected as the Output
Destination.
5
Select the desired Original Orientation:
• Head to Top
• Head to Left
Select Save.
6
Select Start to make copies or Save to select additional features.