Yamaha DS2416 - Manual (Page 158)

160
Effects Parameters
DS2416
REV->PAN (reverb and auto-pan in parallel)
DELAY+ER. (delay and early reflections in parallel)
1. L<->R, L—>R, L<—R, Turn L, Turn R
1. S-Hall (small hall), L-Hall (large hall), Random, Revers (reverse), Plate, Spring
Parameter Range Description
REV TIME 0.3–99.0 s Reverb time
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
HI.RATIO 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF
50 Hz–16.0 kHz, Thru
Hz
Low-pass filter cutoff frequency
REV BAL. 0–100%
Reverb and panned reverb balance (100% = reverb
only)
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
DIR. 1 Panning direction
WAVE Sine, Tri, Square
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave, Square: rectaugular wave)
Parameter Range Description
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB.DLY 0.0–1000.0 ms Feedback delay time
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
TYPE 1 Type of early reflection simulation
ROOMSIZE 0.1–20.0 Reflection spacing
LIVENESS 0–10
Early reflections decay characteristics (0 = dead, 10
= live)
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
ER NUM. 1–19 Number of early reflections
DLY/ER 0–100%
Delay and early reflections balance (0% = early
reflections only, 100% = delay only)