Yamaha DS2416 - Manual (Page 155)

Effects Parameters
157
DS2416
REV+CHORUS (reverb and chorus in parallel)
REV->CHORUS (reverb and chorus in series)
Parameter Range Description
REV TIME 0.3–99.0 s Reverb time
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
HI.RATIO 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
REV/CHO 0–100%
Reverb and chorus balance (0% = chorus only,
100% = reverb only)
FREQ. 0.05–40.00 Hz Modulation speed
PM DEPTH 0–100% Pitch modulation depth
AM DEPTH 0–100% Amplitude modulation depth
MOD.DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)
Parameter Range Description
REV TIME 0.3–99.0 s Reverb time
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
HI.RATIO 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
REV BAL. 0–100%
Reverb and chorused reverb balance (100% =
reverb only)
FREQ. 0.05–40.00 Hz Modulation speed
PM DEPTH 0–100% Pitch modulation depth
AM DEPTH 0–100% Amplitude modulation depth
MOD.DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)