Yamaha DS2416 - Manual (Page 152)

154
Effects Parameters
DS2416
DUAL PITCH
ROTARY
RING MOD. (ring modulator)
Parameter Range Description
PITCH 1 –24 to +24 semitones Pitch 1 pitch shift
FINE 1 –50 to +50 cents Pitch 1 pitch shift fine
PAN 1 L16–C–R16 Pitch 1 pan position
DELAY 1 0.0–1000.0 ms Pitch 1 delay time
FB.G 1 –99 to +99%
Pitch 1 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
LEVEL 1 –100 to +100%
Pitch 1 level (plus values for normal phase, minus
values for reverse phase)
PITCH 2 –24 to +24 semitones Pitch 2 pitch shift
FINE 2 –50 to +50 cents Pitch 2 pitch shift fine
PAN 2 L16–C–R16 Pitch 2 pan position
DELAY 2 0.0–1000.0 ms Pitch 2 delay time
FB.G 2 –99 to +99%
Pitch 2 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
LEVEL 2 –100 to +100%
Pitch 2 level (plus values for normal phase, minus
values for reverse phase)
MODE 1–10 Pitch shift precision
Parameter Range Description
ROTATE STOP, START Rotation stop, start
SPEED SLOW, FAST Rotation speed (see SLOW and FAST parameters)
DRIVE 0–100 Overdrive level
ACCEL 0–10 Acceleration at speed changes
LOW 0–100 Low-frequency filter
HIGH 0–100 High-frequency filter
SLOW 0.05–10.00 Hz SLOW rotation speed
FAST 0.05–10.00 Hz FAST rotation speed
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0–5000.0 Hz Oscillator frequency
FM FREQ 0.05–40.00 Hz Oscillator frequency modulation speed
FM DEPTH 0–100% Oscillator frequency modulation depth