ZyXEL Communications PRESTIGE 2602HW - Manual (Page 5)

Prestige 2602HW Series Quick Start Guide
5
personnel can service the device. Please contact your vendor for further
information.
Use ONLY the dedicated power supply for your device. Connect the power
cord or power adaptor to the right supply voltage, that is, 110V AC for North
America or 230V AC for Europe.
Do NOT use the device if the power supply is damaged as it might cause
electrocution.
If the power supply is damaged, remove it from the power outlet.
Do NOT attempt to repair the power supply. Contact your local vendor to
order a new power supply.
Place connecting cables carefully so that that no one will step on them or
stumble over them. Do NOT allow anything to rest on the power cord and do
NOT locate the product where anyone can walk on the power cord.
If you wall mount your device, make sure that no electrical, gas or water pipes
will be damaged.
Do NOT install nor use your device during a thunderstorm. There may be a
remote risk of electric shock from lightning.
Do NOT expose your device to dampness, dust or corrosive liquids.
Do NOT use this product near water, for example, in a wet basement or near a
swimming pool.
Make sure to connect the cables to the correct ports.
Do NOT obstruct the device ventilation slots, as insufficient airflow may harm
your device.
Do NOT store things on the device.
Connect ONLY suitable accessories to the device.
2.2 Rear Panel Connections