beautypg.com

Reference [other, Changing the function of the foot switch, Using the tuner – Zoom MRS-1044 User Manual

Page 92

background image

Changing the function of the
foot switch

With the default settings of the MRS-1044, a separately

sold foot switch (ZOOM FS01) connected to the [FOOT

SW] jack can be used to play/stop the MRS-1044. If you

want to use the foot switch to perform manual punch-in/out

recording (

→ p.33), use the following procedure to change

the internal setting.

1.

In the main screen, press the [PROJECT/UTILITY]

key.

The display will indicate "PROJECT."

2.

Use the cursor [

E

]/[

R

] keys to make the display

read "UTILITY SYSTEM," and press the [ENTER]

key.

3.

Use the cursor [

E

]/[

R

] keys to make the display

read "UTILITY FOOT SW," and press the [ENTER]

key.

The function currently assigned to the foot switch will be

displayed.

• PLY_STP: The MRS-1044 will alternate between

play/stop each time you press the foot switch (default

setting).

• PUNCH IO: The foot switch can be used to perform

manual punch-in/out.

4.

Use the dial to select either "PLY_STP" or "PUNCH

IO."

5.

To return to the main screen, press the [EXIT] key

several times.

Using the tuner

The MRS-1044 has a built-in chromatic tuner that can be

used when tuning an instrument (e.g., guitar or bass)

connected to the [INPUT 1/2] jacks. Here's how to use the

tuner.

1.

Connect the instrument that you want to tune to

the [INPUT 1/2] jack, and turn on the [ON/OFF] key

for the jack to which you connected it.

2.

In the main screen, press the [EFFECT] key, and

then press one of the lit ALGORITHM keys.

The patch currently selected for the insert effect will be

displayed.

It is not possible to use the tuner from a screen that shows

a send/return effect patch.

3.

Press the [BYPASS/TUNER] key.

The display will alternately show "INSERT BYPASS" and

"TUNER

→ENTER." During this time, the insert effect

will be bypassed.

4.

Press the [ENTER] key.

The display will indicate "TUNER," and the tuner function

will be turned on. While the tuner function is on, the insert

effect will remain bypassed, and the send/return effects

(reverb and chorus/delay) will also be turned off.

5.

Play the note that you want to tune, and tune your

instrument so that the desired note name (C, C#, D,

D#, E...) appears in the display.

Note name

N

OTE

ZOOM MRS-1044

92

Refer

e

nce

[Other]

Reference [Other]

This section explains how to use functions such as the MRS-1044's built-in tuner, and how to change the function of the foot

switch.