Zoom MRS-1044 User Manual
Page 25
Raise the MASTER fader to the 0 (dB) position.
Press the PLAY [
R] button to play back the song,
and use the faders of each channel (DRUM, BASS,
1 – 6, 7/8, 9/10) to adjust the volume balance.
The drum sound and bass sound of the rhythm section are
assigned to the DRUM and BASS channels respectively,
and recorder tracks 1 – 6, 7/8, 9/10 are assigned to mixer
channels 1 – 6, 7/8, and 9/10 respectively. Use the
DRUM/BASS faders to adjust the volume of the rhythm
section, and faders 1 – 6, 7/8, and 9/10 to adjust the volume
of each track of the recorder section.
The level meter (DRUM, BASS, 1 – 6, 7/8, 9/10) located in
the center of the display indicates the post-fader signal
level of each channel. The L/R level meter indicates the
level of the signal that has passed through the MASTER
fader. Adjust the mix, being careful that the 0 (dB) dot of
each level meter does not light.
If necessary, you can also make the level meters show the
pre-fader signal levels (
→ p.54).
In the main screen, press the [PAN] key of the
TRACK PARAMETER section.
When you press one of the keys of the TRACK
PARAMETER section, the track parameter menu will
appear, allowing you to set parameters such as pan and EQ
for each channel. If you press the [PAN] key, a screen will
appear in which you can adjust the Pan setting.
Press the status key of the channel whose pan you
want to adjust.
When the track parameter menu is displayed, you can press
a status key (or the cursor [
E]/[R] keys) to select the
channel whose parameter you want to adjust.
Turn the dial to adjust the pan value.
The pan value can be adjusted in a range of L100 (far left)
– 0 (center) – R100 (far right).
Repeat steps 5 – 6 to adjust the pan of other
channels.
For the stereo channels (the DRUM channel, channels 7/8
and 9/10), the PAN parameter functions as a BALANCE
parameter that adjusts the volume balance between the
L/R channels.
Press the [EQ HIGH] key or [EQ LOW] key.
Press the [EQ HIGH] key to adjust the high-frequency
equalizer, or press the [EQ LOW] to adjust the low-
frequency equalizer. The following illustration shows the
8
Adjust the EQ
N
OTE
7
6
Pan value
2
5
4
Adjust the pan
H
INT
Track 9/10
Track 7/8
Track 6
Track 5
Track 4
Track 3
Track 2
Track 1
MASTER
DRUM
Bass
sound
Drum
sound
BASS
1
2
3
4
5
6
7/8 9/10
Recorder section
Rhythm section
3
2
ZOOM MRS-1044
25
Intr
oductory
tour
Step 4: Mixdown