Zoom MRS-1044 - Manual (Page 8)

Front panel
ZOOM MRS-1044
8
Parts
of
the
MRS-1044
and
w
hat
they
d
o
Parts of the MRS-1044 and what they do
(1) [PEAK] indicators
These show whether the input signal (input source) from
the [INPUT 1] and [INPUT 2] jacks is distorting. The
indicators will light -6 dB below the level at which the
sound begins to distort.
(2) [INPUT 1]/[INPUT 2] controls
These controls adjust the sensitivity of the input signal
from the [INPUT 1] and [INPUT 2] jacks.
(3) [ON/OFF] keys
These keys enable/disable [INPUT 1] and [INPUT 2].
When enabled (on), the key will light.
(4) [REC LEVEL] control
This control adjusts the volume of the input signal from the
[INPUT 1] and [INPUT 2] jacks.
(5) [CLIP] indicator
This indicator will light if the signal that has passed
through the [REC LEVEL] control is clipping.
(1)
(2)
(3)
(5)
(4)
Input section
Input section ( ➔ p.8)
Rhythm section ( ➔ p.9) Fader section ( ➔ p.10) Transport section ( ➔ p.12)
Display section ( ➔ p.10)
TRACK PARAMETER section ( ➔ p.11)
Control section ( ➔ p.11)
Effect section ( ➔ p.9)