Xerox 701P46740 - Manual (Page 8)

4 Security Guide
NOTE: Regardless of the security profile, anonymous FTP is
Read-only with restricted access to /export/home/ftphome only.
Low FTP is enabled.
Telnet, rsh is disabled.
NFS client is enabled.
AutoFS is enabled.
Walkup users can reprint
from “Saved Jobs” and
CD-ROM.
Terminal window is
password protected.
Auto-login is enabled. First choice
setting for
most
environments. Similar to
DocuSP 3.x
“High”.
Supports
FreeFlow®
workflow.
Anonymous FTP is
ready-only and
restricted.
To enable telnet, go
to [Setup], [FTP/
Remote
Diagnostics].
Medium FTP is disabled.
telnet, rsh is disabled.
NFS client is disabled.
AutoFS is disabled, e.g.; /
net/and
home/ are
not automatically
mounted).
NFS server is filtered via
RPC tab.
Walkup user can reprint
from CD_ROM.
Terminal window is
password protected.
Auto-login is enabled. Environments
requiring high
security but
with a need to
integrate
FreeFlow/
Digipath. Supports
FreeFlow
workflow and
legacy
DigiPath
workflow. Anonymous FTP is
ready-only and
restricted.
To enable telnet, go
to [Setup], [FTP/
Remote
Diagnostics].
High FTP is disabled.
telnet, rsh is disabled.
NFS client is disabled.
AutoFS is disabled, e.g.; /
net/and
home/ are
not automatically
mounted.
NFS server is disabled on
customer network.
Walkup users cannot
reprint anything.
Terminal window is
password protected.
Auto login is disabled
(login is always required
from GUI). For
government
market. Does not
support legacy
DigiPath
workflow.
Supports
FreeFlow
workflow. File FTP is
disabled.
File transfer can be
done via Secure
FTP.
For CFA support,
that is FTP upload
of outload, go to
[Setup], [FTP/
Remote
Diagnostics] menu,
select enable FTP.
Custom Any profile can be edited
to adjust to user needs
Profile Characteristics User Compatibility Comments