Yamaha DSP-Z9 - Manual (Page 32)

30
USING THE GUI REMOTE CONTROL
4
Use k / n / l / h to navigate through the
categories, menus and parameters.
5
To select the parameter you want to adjust
press ENTER.
6
Use k / n / l / h to adjust the parameters.
y
For details about each parameter see page 55.
7
When finished, press EXIT to exit.
All GUI remote control operations featured in this manual can
also be performed using the main remote control. When using the
main remote control to perform these operations, make sure that
10KEY/AMP on the remote controller is set to AMP.
Note
TOP EXIT
ENTER
MULTI CH IN PURE DIRECT
TOP EXIT INPUT MODE
SOUND
TITLE
MENU
CHAPTER
PAUSE STOP POWER REC
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
– +
ENTER
00EN.00_DSPZ9_GB.book Page 30 Thursday, November 13, 2003 10:55 AM