Yamaha RX-V800RDS - Manual (Page 58)

56
REMOTE CONTROL FEATURES
Returning to the Factory Setting
■ To return to the factory-set codes
and to clear the learned functions
in all positions
1 Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
2 Enter the code number “9990”.
Make sure that the indicator flashes twice.
■ To return to the factory-set codes
and to clear the learned functions
in each position
1 Set the selector dial to the
position for the
component to be returned
to the factory setting.
2 Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
3 Enter the code number “0000”.
Make sure that the indicator flashes twice.
The following codes are factory set.
Selector dial
position
Component Code
TV TV 0101
CBL/SAT Satellite tuner 0006
VCR VCR 0002
DVD/LD DVD player 0008 (YAMAHA DVD
player)
CD CD player 0005 (YAMAHA CD
player)
TAPE/MD Tape deck 0004 (YAMAHA Tape
deck)
AMP/TUN this unit 0003
DSP/TUN this unit 0013
We recommend that you write all the code numbers you
have set on the “Quick Reference Card”.