beautypg.com

Normal stereo reproduction, Dolby digital matrix 6.1 or dts es decoder, Virtual cinema dsp and silent cinema dsp – Yamaha RX-V800RDS User Manual

Page 31

background image

29

English

INTR

ODUCTION

PREP

ARA

TION

B

ASIC

OPERA

TION

AD

V

ANCED

OPERA

TION

ADDITIONAL

INFORMA

TION

APPENDIX

BASIC PLAYBACK

EFFECT

Dolby Digital Matrix 6.1 or DTS

ES decoder

If you want to use the Dolby Digital Surround EX or DTS
ES software, press 6.1/ES to turn on the Dolby Digital
Matrix 6.1 or DTS ES decoder (see “12 6.1/ES AUTO”
on pages 45 and 60 for details).

Remote control

Virtual CINEMA DSP and SILENT

CINEMA DSP

You can experience the virtual CINEMA DSP sound field
by setting “1C REAR L/R SP” on the SET MENU to
NONE. The sound field processing is changed to the
Virtual CINEMA DSP mode according to the selected
DSP program. Virtual CINEMA DSP is performed by
using the main speakers. You can also listen to SILENT
CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is
on.

Note

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR L/R SP” is set to NONE in the following cases:
– when the 5ch Stereo, DOLBY DIGITAL/Normal or DTS/

Normal program is selected;

– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when the Dolby Digital KARAOKE source is played;
– when using the test tone; or
– when connecting the headphones.

Front panel

or

Remote control

y

• If the selector dial is set to a position other than the DSP/TUN

position, first press DSP and then EFFECT on the remote
control.

Notes

• If you turn off the sound effect, no sound is output from the

center and rear speakers.

• If you turn off the sound effect while a Dolby Digital or DTS

signal is being output, the dynamic range of the signal is
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the main speakers.

• The volume may be greatly reduced when you turn off the

sound effect or if you set “10B D-RANGE” on the SET MENU
to MIN. In this case turn on the sound effect.

Normal Stereo Reproduction

Press EFFECT to turn off the sound effect
for normal stereo reproduction.
Press EFFECT again to turn the sound effect back
on.

DIGITAL

DTS

MOVIE THEATER 1

2

DSP

6.1/ES

PCM

PRO LOGIC

A

SP

B

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

V-AUX

DVD
MD/TAPE
CD-R
TUNER
CD
PHONO

VIRTUAL

VIRTUAL

PS PTY RT CT

PTY HOLD EON STEREO AUTO
NEWS INFO AFFAIRS SPORT
MEMORY TUNED

ZONE 2

VOLUME

SLEEP

The “ c ” indicator lights up.