Yamaha CLP-990M EN - Manual (Page 84)

84
CLP-990
MIDI [MIDI SETTING]
Procedure
Press the [MIDI SETTING] button to enter MIDI setting mode.
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
See the procedure on page 72.
Setting for:
Main, Left, Layer, Left Layer
Setting range:
Ch1 - Ch16, Off (Not transmitted.)
Normal setting:
Main — Ch1
Left — Ch2
Layer — Ch3
Left Layer— Ch4
This parameter enables you to specify for each channel
whether the Clavinova receives data at the MIDI [IN]
connector or the [TO HOST] port A (CBX driver’s
port A).
The received data is played back using the XG voices (page
6 in the “Reference Booklet” for the CLP-990). You can also
assign the Clavinova’s preset voices to part of the data. (See
“XG Alternative” on page 90.)
See the procedure on page 72.
Setting for:
Ch1 - Ch16
Setting range:
On/Off
Normal setting:
On for all channels
DEMO SONG SELECT
TRANSPOSE
MASTER VOLUME TEMPO VOICE EFFECT SONG
CLP-990
MIN MAX
NEW SONG
SONG BALANCE UP DOWN BRILLIANCE
TRACK
1
TRACK
2
EXTRA
TRACKS
FILE METRONOME CONTRAST
SONG
SETTING
START/ STOP SETTING
SPLIT POINT VOICE SETTING
REVERB CHORUS MIDI
SETTING
OTHER
SETTING REC
PIANO
MAIN
LEFT
E. PIANO/
BASS
HARPSI-
CHORD
MALLET ORGAN STRINGS/
CHOIR
STOP START/
PAUSE
SYNCHRO START
EXIT
PIANO/ E. PIANO HARPSI/
MALLET ORGAN/ STRINGS BASS
A B
C D
NO YES
[MIDI SETTING]
Setting the MIDI transmit chan-
nel [MidiOutChannel]
Setting the MIDI receive channel
(Port A) [MidiInAChannel]
A B
C D
NO YES
Select a voice part. Specify the channel.
TIP
A B
C D
NO YES
Select a channel. Select On or Off.
MIDI IN TO HOST
Sound source A
Channels 1-16
Port A Port B
Sound source B
Channels 1-16
MIDI data
Used for song playback Used for performance
and playback