Yamaha R-V303 - Manual (Page 22)

20
1
Select “TUNER” as the input source.
2
Select the reception band (FM or AM) confirming it on
the display.
3
4
Tune to a desired station manually.
* To continue tuning search, hold down the button.
1
Select “TUNER” as the input source.
2
Select the reception band (FM or AM) confirming it on
the display.
3
4
To tune to a higher frequency, press the right side
once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press the button again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change it to
the MANUAL TUNING method.
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
Note
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
AUTOMATIC TUNING MANUAL TUNING
TUNING
MODE
AUTO/MAN’L MONO
TUNING
MODE
AUTO/MAN’L MONO
DOWN TUNING UP
DOWN TUNING UP
Turn the “AUTO
TUNING” indicator off.
2 1
STANDBY/ON
NATURAL SOUND AV RECEIVER
PHONES BASS TREBLE BALANCE
VOLUME
5 5 4
3
2 l 0 l 2
3
4 5 5 4
3
2 l 0 l 2
3
4 L R
l6 20
28
40
60
l2
8
4
2
0 –dB
5 5 4
3
2 l 0 l 2
3
4
FM/AM
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
CENTER MODE DOWN TUNING UP EFFECT
MEMORY EDIT PROGRAM
A/B/C/D/E 1 2 3 4 5 6 7 8
TAPE/MD MONITOR VIDEO VCR
TUNER CD PHONO
REAR LEVEL CENTER LEVEL
0 l0 0 l0
3 4
FM/AM
or AM FM
TUNER CD PHONO TUNER CD PHONO
AUTO TUNING
FM/AM
or AM FM