ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 96)

ZyAIR B-4000 Hot Spot Gateway
12-2 Configuration, Firmware and Accounting Log Maintenance
Step 2. Specify the name of the firmware file in the File Path field or click Browse to locate the file
and click Apply to start the file transfer process. The firmware must be a binary file and should
have a .bin extension.
Step 3. When the file transfer is completed successfully, a restart message displays and the ZyAIR
automatically restarts.
WARNING!
Do not interrupt the file upload process as this may PERMANENTLY damage the
device.
Figure 12-2 System Restart
Step 4. After the ZyAIR finishes restarting, access the web configurator again. Check the firmware
version number in the System screen.
When the ZyAIR restarts, all connections terminate. Subscribers need to log in
again.
12.2.2 Scheduled Firmware Upgrade
Click SYSTEM TOOLS and then Scheduled Firmware Upgrade to display the screen as shown.
Configure the screen to automatically download the latest firmware from a TFTP server.
Make sure that the TFTP server has the firmware and synchronization check file
before you configure for scheduled firmware upgrades.
Make sure that you check new features or functionality enhancements in new firmware releases before you
put the firmware on the TFTP server.
WARNING!
Do not interrupt the file upload process as this may PERMANENTLY damage the
device.