ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 82)

ZyAIR B-4000 Spot Gateway
10-10 Wireless LAN
Table 10-2 WEP Key Setup
LABEL DESCRIPTION
1 … 4 Enter the WEP keys in the fields provided and select a key as the default key to
use.
If you select 64 bit in the WEP Encryption field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(e.g. 11AA22BB33) for HEX key type
or
Enter 5 printable ASCII characters (case sensitive) ranging from “a-z”,
“A-Z” and “0-9” (e.g. MyKey) for ASCII key type.
If you select 128 bit in the WEP Encryption field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 printable ASCII characters (case sensitive) ranging from “a-
z”, “A-Z” and “0-9” (for example, MyKey12345678) for ASCII key type.
If you select 256 bit in the WEP Encryption field,
Enter either 58 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
for HEX key type
or
Enter 29 printable ASCII characters (case sensitive) ranging from “a-
z”, “A-Z” and “0-9” for ASCII key type.
ASCII WEP keys are case sensitive.
You must configure all four WEP keys the first time you
use the ZyAIR.
Apply Click Apply to save the changes.