ZyXEL Communications ZyXEL ZyAIR B-4000 - Manual (Page 71)

ZyAIR B-4000 Hot Spot Gateway
Syslog 9-3
The following table describes the labels in this screen.
Table 9-1 Syslog Configuration
LABEL DESCRIPTION
Syslog Select Enable to activate the syslog function.
Select Disable to de-activate the syslog function.
Syslog Server
Syslog on LAN Select this check box to specify a syslog server on the LAN.
Server IP Address Enter the IP address (in dotted decimal notation) of the syslog server on the LAN.
Server MAC Address Enter the MAC address of the syslog server on the LAN.
Syslog on WAN Select this check box to specify a syslog server on the WAN.
Server 1 IP Address Enter the IP address of the first syslog server on the WAN in dotted decimal
notation.
Server 2 IP Address Enter the IP address of the second syslog server on the WAN in dotted decimal
notation.
Log Settings
Syslog Name This field displays the name (or type) of the syslog. Select the check box(es) to
send the syslog.
Description This field displays a short description about the syslog.
Interval Time This field displays when or how often the ZyAIR sends the syslog. If available,
enter the number of minutes the ZyAIR waits between sending the syslog.
Apply Click Apply to save the settings.