beautypg.com

ZyXEL Communications ZyXEL ZyAIR B-4000 User Manual

Page 41

background image

ZyAIR B-4000 Hot Spot Gateway

WAN, LAN and Server Setup 4-7

Figure 4-2 Server

The following table describes the fields in this screen.

Table 4-2 Server

LABEL DESCRIPTION

Web Server

Web Server Port

Specify the port number of the embedded web server on the ZyAIR for accessing
the web configurator. The default port number is 80.

Enter a number between 8010 and 8060 to access the web configurator behind a
NAT-enabled network.

If you enter a number between 8000 and 8099, you need to append the port
number to the WAN or LAN port IP address to access the web configurator. For
example, if you enter “8010” as the web server port number, then you must enter
“http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP
address.

See also other documents in the category ZyXEL Communications Hardware: