Technical specification, Model, Cl milner brick – Yeoman CL MILNER BRICK YMMB User Manual
Page 12: Standard features packing list
12
TECHNICAL SPECIFICATION
CL MILNER BRICK
•
Primary Air (under grate air for full Multi-fuel use).
•
Airwash (for wood burning/clean glass).
•
Adjustable secondary air (to ensure complete burning of
flue gases).
•
Riddling grate system for clean de-ashing.
•
Ashpan.
•
A smoke control kit is required if this appliance is to be
used in a smoke control area.
STANDARD FEATURES
PACKING LIST
•
User instructions
•
Installer instructions
•
Guarantee card
•
Pair leather gloves
•
Ashpan tool
•
Riddling tool
•
Fixing kit
•
Rope sealing kit
Model
CL Milner Brick
Nominal Heat Output
Wood
kW
4.6
Solid Fuel
kW
5.0
Flue Draught at Nominal Heat Output
All Fuels
mm Wg
1.5
inch Wg
0.05
Flue Gas Mass Flow
Wood
g/s
4.1
Solid Fuel
g/s
3.9
Flue Gas Temperature
Wood
°C
338
Solid Fuel
°C
338
Flue Outlet Size
mm
152
inch
6
Weight
kg
90
Recommended Fuels
Wood
Seasoned wood (less than 20% moisture
content)
Refuel Rate
45 mins
Solid Fuels
Briquette smokeless fuel suitable for closed
appliances.
(Ancit - Phurnacite - Taybrite - Homefire ovals)
Refuel Rate
1 hour
Do not burn petroleum based fuels such as petro-coke, as these will seriously damage the appliance.
As tested to the requirements of EN 13229 for intermittent operation.
Note: For efficiency and CO figures see the Declaration of Conformity at the rear of this manual.